DuraClassic™ Columns

Architectural Column Products

All Products

DuraClassic™ Composite Fiberglass Column Designs

Greek Doric #195GD	Tuscan #200DC	Tuscan Fluted #205DC	Roman Doric #210DC

Roman Doric #215DC	Roman Doric w/Attic #220DC	Roman Doric w/Attic #225DC	Tuscan Straight Shaft #200DCNT

Tuscan Square #200DCS	Tuscan Square Fluted #205DCSF	Craftsman #200DCCR	Tuscan Square Paneled #200DCRP	Tuscan Square Recessed Panel #200DCRCP

Roman Ionic #230DC	Roman Ionic Fluted #235DC	Scamozzi #240DC	Scamozzi Fluted #245DC	Roman Corinthian #250DC

Roman Corinthian Fluted #255DC	Empire #260DC	Empire Fluted #265DC	Greek Angular Ionic #270DC	Greek Angular Ionic Fluted #275DC

Empire W/Necking #280DC	Empire W/Necking Fluted #285DC	Greek Erectheum Ionic #300DC	Greek Erectheum Ionic Fluted #305DC	Temple of Winds #330DC

Temple of Winds Fluted #335DC

Roman Corinthian
Square #250/255DCS

The capitals below are available with all Square Columns.

Design #230DC – Plain,
235DC – Fluted

Design #240DC – Plain,
245DC – Fluted

Design #260DC – Plain,
265DC – Fluted

Design #270DC – Plain,
275DC – Fluted

Design #280DC – Plain,
285DC – Fluted

Greek Erectheum Ionic Capital with Necking

Design #290DC – Plain,
295DC – Fluted

Design #300DC – Plain,
305DC – Fluted

Design #310DC – Plain,
315DC – Fluted

Design #330DC – Plain,
335DC – Fluted

DuraClassic™ Tuscan Round

Design #200DC

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	5 1/2″	6′ – 10′	3 1/4″	8 1/4″	1 3/4″	7 1/8″
8″	6 1/2″	5′ 6″‘ – 10’	4 1/4″	10 1/4″	2 3/8″	9 9/16″
10″	8 1/2″	6′ – 12′	5 1/4″	12 7/8″	3″	11 7/8″
12″	10″	6′ – 16′	6″	15 1/4″	3 3/8″	14 1/2″
14″	12″	8′ -16′	7 3/8″	18 3/4″	4″	17 1/4″
16″	13 1/2″	8′ – 20′	8 3/8″	21 1/2″	4 5/8″	19 1/4″
18″	15″	8′ – 20′	9 5/8″	24 1/4″	5″	21 3/8″
20″	17″	12′ – 20′	10 3/4″	27″	5 5/8″	24 1/4″
24″	20″	8′ – 24′	13 1/4″	32 1/2″	6 7/8″	28 3/4″

DuraClassic™ Tuscan Fluted Round

Design #205DC

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	5 1/2″	6′ – 8′	3 1/4″	8 1/4″	1 3/4″	7 1/8″
8″	6 1/2″	5′ 6″‘ – 10’	4 1/4″	10 1/4″	2 3/8″	9 9/16″
10″	8 1/2″	8′ – 12′	5 1/4″	12 7/8″	3″	11 7/8″
12″	10″	8′ – 16′	6″	15 1/4″	3 3/8″	14 1/2″
14″	12″	8′ -16′	7 3/8″	18 3/4″	4″	17 1/4″
16″	13 1/2″	8′ – 18′	8 3/8″	21 1/2″	4 5/8″	19 1/4″
18″	15″	10′ – 18′	9 5/8″	24 1/4″	5″	21 3/8″
20″	17″	12′ – 20′	10 3/4″	27″	5 5/8″	24 1/4″
24″	20″	14′ – 20′	13 1/4″	32 1/2″	6 7/8″	28 3/4″

DuraClassic™ Roman Doric

Design #210DC Plain/#215DC Fluted

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	5 1/2″	6′ – 10′	3 1/4″	8 1/4″	1 3/4″	7 1/8″
8″	6 1/2″	5′ 6″ – 10′	4 5/16″	10 3/8″	2 1/2″	9 3/4″
10″	8 1/2″	6′ – 12′	5 1/2″	12 15/16″	3 5/16″	12 1/2″
12″	10″	6′ – 16′	6 1/4″	15 1/4″	3 11/16″	14 3/4″
14″	12″	8′ -16′	7 7/16″	18 5/8″	4 3/8″	17 1/2″
16″	13 1/2″	8′ – 20′	8 3/4″	21 1/2″	4 11/16″	19 7/8″
18″	15″	8′ – 20′	10″	24 3/8″	5 3/8″	22 1/4″
20″	17″	6′ – 20′	11″	27″	6 3/4″	25″
24″	20″	8′ – 24′	13 1/4″	32 1/2″	7 5/16″	28 3/4″

DuraClassic™ Roman Doric w/Attic Base

Design #220DC Plain/#225DC Fluted

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	5 1/2″	6′ – 10′	3 15/16″	8 1/2″	1 3/4″	7 1/8″
8″	6 1/2″	5′ 6″ – 10′	5 1/8″	10 1/4″	2 1/2″	9 3/4″
10″	8 1/2″	6′ – 12′	6 1/4″	13″	3 5/16″	12 1/2″
12″	10″	6′ – 16′	7 1/4″	15 1/4″	3 11/16″	14 3/4″
14″	12″	8′ -16′	8 3/4″	18 5/8″	4 3/8″	17 1/2″
16″	13 1/2″	8′ – 20′	10 1/8″	21 1/2″	5 11/16″	19 7/8″
18″	15″	8′ – 20′	11 3/8″	24 1/4″	5 3/8″	22 1/4″
20″	17″	6′ – 20′	12 7/8″	27″	6 3/4″	25″
24″	20″	8′ – 24′	15 1/16″	32 1/2″	7 3/4″	29 3/4″

DuraClassic™ Tuscan Round Non-Tapered

Design #200DCNT Plain

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	6″	6′ – 8′	3 1/4″	7 31/32″	1 3/4″	8 1/4″
8″	8″	5′ 6″ – 10′	4 1/4″	10 7/8″	2 3/8″	9 3/4″
10″	10″	6′ – 12′	5 1/4″	13 1/2″	3 1/16″	12 3/4″
12″	12″	6′ – 16′	6″	15 1/4″	3 3/8″	15 1/4″
14″	14″	8′ -16′	7 3/8″	18 3/4″	4″	19 1/4″
16″	16″	8′ – 20′	8 3/8″	21 1/2″	4 1/2″	21 1/2″
18″	18″	8′ – 20′	9 5/8″	24 1/4″	8″	24 7/16″

DuraClassic™ Tuscan Square

Design#200DCS

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
6″	6″	8′ – 10′	3 1/4″	8 1/4″	1 3/4″	7 5/8″
8″	8″	8′ – 10′	4 1/4″	10 1/4″	2 3/8″	10 1/4″
10″	10″	8′ – 12′	5 1/4″	12 3/4″	3″	12 3/4″
12″	12″	8′ – 16′	6 1/4″	15 1/4″	3 3/8″	15 1/4″
14″	14″	8′ -16′	7 5/16″	18 3/4″	4″	17 7/8″
16″	16″	10′ – 18′	8 3/8″	20 3/16″	5 1/4″	20 3/8″
18″	18″	10′	9 5/8″	24 1/4″	5 1/8″	21 1/2″

DuraClassic™ Tuscan Fluted Square

Design#205DCS

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
8″	8″	8′ – 10′	4 1/4″	10 1/4″	2 3/8″	10 1/4″
10″	10″	8′ – 10′	5 1/4″	12 3/4″	3″	12 3/4″
12″	12″	8′ – 12′	6 1/4″	15 1/4″	3 3/8″	15 1/4″

DuraClassic™ Craftsman Square Tapered

CraftsmanST

Bot. Dia.	Top Dia.	Shaft Heights
8 1/2″	5 1/4″	5′
9 1/4″	5 1/4″	6′
9 1/2″	7 1/2″	5′ 6″
11 1/4″	8 1/2″	5′
12″	8 1/2″	5′
11 7/8″	9″	8′
15 1/4″	11 1/2″	4′ 10″
15 1/4″	11 1/2″	6′
15 1/4″	11 1/2″	8′
16″	9″	64″
16″	13″	5′

DuraClassic™ Tuscan Raised Panel

Design#200DCRP

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
8″	8″	8′ – 10′	4 1/4″	10 1/2″	2 7/8″	11 1/4″
10″	10″	8′ – 10′	5 1/8″	13″	3 1/2″	13 3/4″
12″	12″	10′ – 12′	5 5/8″	14 7/8″	3 5/8″	16 1/8″

DuraClassic™ Tuscan Square Recessed Panel

Design#200DCRCP

Bot. Dia.	Top Dia.	Shaft Heights	Base/Plinth Height	Plinth Width	Cap Height	Cap Width
8″	8″	8′ – 10′	4 1/4″	10 1/4″	2 3/8″	10 1/4″
10″	10″	8′ – 12′	5 1/4″	12 3/4″	3″	12 3/4″
12″	12″	8′ – 16′	6 1/4″	15 1/4″	3 3/8″	15 1/4″
14″	14″	8′ -16′	7 3/8″	18 3/4″	4″	18 3/4″

DuraClassic™ Roman Ionic

Design#230DC Plain/#235DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5 1/4″	2 1/4″	6 1/8″
8″	7 1/2″	3 1/4″	10 1/8″
10″	9″	3 5/8″	11″
12″	10 1/2″	4 1/2″	12 1/2″
14″	12″	5 1/2″	17 1/2″
16″	13″	5 1/2″	17 1/2″
18″	16 1/4″	6 1/2″	20″
20″	18 3/4″	8 3/4″	25″
24″	22 3/4″	9 1/2″	26 1/2″

DuraClassic™ Scamozzi

Design #240DC Plain/#245DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5 1/4″	2 5/8″	7 3/4″
8″	6 3/4″	3″	10 1/4″
10″	8 1/2″	3 7/8″	14 1/2″
12″	10″	4 7/8″	16 3/4″
14″	12″	5 1/2″	19″
16″	13″	6″	19 1/2″
18″	14 1/2″	6 1/4″	22 1/4″
20″	18″	8 1/2″	28 1/2″
24″	22 1/2″	11″	35 1/2″

DuraClassic™ Roman Corinthian

Design #250DC Plain/#255DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5″	7″	9 1/2″
8″	7 1/4″	10 1/4″	12 3/4″
10″	8 1/2″	12″	15″
12″	10″	14 1/2″	18 1/4″
14″	12 1/2″	17″	22″
16″	14″	20″	27″
18″	16″	23″	32 1/2″
20″	18″	25 1/2″	39″
24″	22 1/2″	32″	42″

DuraClassic™ Empire Ionic

Design #260DC Plain/#265DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5″	3 1/8″	9″
8″	6 1/2″	3 3/4″	10″
10″	9″	5 1/2″	16″
12″	10 1/4″	6 1/4″	18″
14″	12 1/2″	7 1/4″	20 1/4″
16″	14″	8 3/4″	23″
18″	16 1/2″	10″	32″
20″	18″	11 1/4″	34″
24″	20 1/2″	12 3/4″	35 1/2″

DuraClassic™ Empire w/Necking

Design #280DC Plain/#285DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5″	6 7/8″	9″
8″	6 1/4″	7 3/4″	10″
10″	8 1/2″	10″	13 1/2″
12″	10″	11″	18″
14″	12″	14 1/2″	20 1/2″
16″	14″	13 1/4″	23″
18″	16″	15″	32″
20″	18″	17 1/4″	34″
24″	20 1/2″	19″	35 1/2″

DuraClassic™ Greek Erectheum Ionic

Design #300DC Plain/#305DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5″	3 1/4″	6 3/4″
8″	6 1/4″	3 3/4″	7 3/4″
10″	9″	5 1/2″	12″
12″	10″	6 1/4″	14 1/2″
14″	12 3/4″	7″	15″
16″	14 1/2″	9″	17 1/2″
18″	15 1/4″	10 1/4″	22″
20″	18″	11″	26″
24″	20 1/2″	13″	30 1/2″

DuraClassic™ Temple of Winds

Design #330DC Plain/#335DC Fluted

Bottom Dia.	Cap Outside Dia.	Cap Height	Abacus Width
6″	5 1/4″	7″	8″
8″	7″	8″	12″
10″	9″	11 1/8″	15 1/4″
12″	11″	13 3/4″	17″
14″	12″	16″	19″
16″	14″	16″	23″
18″	16″	18 1/8″	26 3/4″
20″	17 1/2″	21 1/2″	28″
24″	21″	28 1/2″	31 1/4″

Column Selection
Assistance

Building the perfect column for you
custom application has never been easier

Start Now

Balustrade Selection
Assistance

Let us help identify the right balustrade system
for your custom application

Know More

P.O. Box 465020 Lawrenceville, Georgia 30042 Telephone: 800-963-3060 Fax: 770-962-6988
Copyright © 2023 Melton Classics Incorporated - All Rights Reserved | Privacy Policy | Terms of Use | Terms and Conditions | Fiberlite Square

Disclaimer for Melton Classics Inc.

If you require any more information or have any questions about our site's disclaimer, please feel free to contact us by email at info@meltonclassics.com

Disclaimers for Melton Classics

All the information on this website - https://meltonclassics.com - is published in good faith and for general information purpose only. Melton Classics does not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information you find on this website (Melton Classics), is strictly at your own risk. Melton Classics will not be liable for any losses and/or damages in connection with the use of our website.

From our website, you can visit other websites by following hyperlinks to such external sites. While we strive to provide only quality links to useful and ethical websites, we have no control over the content and nature of these sites. These links to other websites do not imply a recommendation for all the content found on these sites. Site owners and content may change without notice and may occur before we have the opportunity to remove a link which may have gone 'bad'.

Please be also aware that when you leave our website, other sites may have different privacy policies and terms which are beyond our control. Please be sure to check the Privacy Policies of these sites as well as their "Terms of Service" before engaging in any business or uploading any information.

Consent

By using our website, you hereby consent to our disclaimer and agree to its terms. Our Disclaimer was generated from the Disclaimer Generator.

Update

Should we update, amend or make any changes to this document, those changes will be prominently posted here.